|
|
|
 |
|
|
 |
Construction
- Pass through design
- #14 gauge stainless steel construction
- Stainless steel control panel enclosure
- Adjustable stainless steel sanitary legs
- Removable scrap trays
- Stainless steel machine base
- Stainless steel wash piping and nozzles
- Stainless steel internal rinse piping with brass
nozzles
|
|
|
Features
- 10 HP wash pump to deliver 280 gpm and 40 psi
- Top and bottom rotating stainless steel wash and rinse
arms
- Wash and rinse pressure and tempurature gauges
- Steam injector tank heat
- Steam pressure gauge and shut-off valve for tank heat
- Vacuum breaker and strainer for rinse water
- Tank drain and overflow
- Machine pre-wired and tested
- Single point electrical connection
Capacities
- 20 batches per hour
- 60 gallon (U.S) wash tank
- 24" x 56" x 28" clear work area (hold two 24"x28"
Racks)
Controls
- Automatic wash water (tank) temperature control
- Complete automatic wash, drain and rinse cycles
- Adjustable wash, drain and rinse cycles
- "Push to stop" button for emergency shut down
- Capability of continuous (manual) wash or rinse cycle
Utility
Requirements
- Hot water: 22 gpm @ 20 psi. Consumption: 88 gph
- Tank heat steam: 80 lb./hr @ 15 psi
- Electrical:
460v-3ph-60hz, 4kw,
7amp
230v-3ph-60hz, 4kw, 13amp
208v-3ph-60hz, 4kw, 15amp
Optional Equipment
- Pipe coil tank heat
- Electric tank heat (user to provide a separate fused
disconnect)
- Rinse water temperature booster: To rise rinse water
temperature to 180 from 120 or 140 F
• Steam heated
• Electric
- Racks:
- General utility basket
- Utensil
basket
- Cover
- Sheet Pan Rack
- Counter pan rack
|
|
|
|
