|
|
|
 |
|
|
 |
Construction
- Single door front load design
- #14 gauge stainless steel construction
- Stainless steel control panel enclosure
- Adjustable stainless steel sanitary legs
- Removable scrap trays
- Stainless steel machine base
- Stainless steel door-cable pulley supports
- 42" diameter roto-table
- Stainless steel wash piping and nozzles
- Stainless steel internal rinse piping with brass
nozzles
- 12" diameter vent opening
|
|
|
Features
- 10 HP wash pump to deliver 280 gpm and 40 psi
- Wash and rinse pressure and tempurature gauges
- Steam injector tank heat
- Steam pressure gauge and shut-off valve for tank heat
- Vacuum breaker and strainer for rinse water
- Tank drain and overflow
- Machine pre-wired and tested
- Single point electrical connection
Capacities
- 18 batches per hour
- 63 gallon (U.S) wash tank
- 42" diameter x 28"H internal work area
Controls
- Automatic wash water (tank) temperature control
- Complete automatic wash, drain and rinse cycles
- Adjustable wash, drain and rinse cycles
- "Push-stop" button for emergency shut down
- Capability of continuous (manual) wash or rinse cycle
Utility
Requirements
- Hot water: 20 gpm @ 20 psi
Consumption: 130 gph
- Tank heat steam: 80 lb./hr @ 15 psi
- Electrical:
460v-3ph-60hz, 8kw,
16amp
230v-3ph-60hz, 8kw, 32amp
208v-3ph-60hz, 8kw, 36amp
Optional Equipment
- Steam coil tank heat
- Powered vent fan
- Electric tank heat (user to provide a separate fused
disconnect)
- Rinse water temperature booster; steam heated or
electric to raise incoming rinse water temperature from 120F or 140F to
180F
- Racks:
- General utility basket
- Utensil
basket
- Sheet pan rack
- 40" diameter rack
- Cover for 40"
rack
- Assorted pan rack
|
|
|
|
