|
|
|
 |
|
|
 |
Construction
-
Pass-thru corner design
-
Third door for easy access inside
the machine
-
#14 gauge stainless steel
construction
-
Stainless steel control panel
enclosure
-
Adjustable stainless steel
sanitary legs
-
Removable scrap trays
-
Stainless steel machine base
-
Stainless steel door-cable pulley
supports
-
Stainless steel wash piping and
nozzles
-
Stainless steel internal rinse
piping with brass nozzles
|
|
|
Features
- 5 HP wash pump to deliver 90 gpm and 40 psi
- Top and bottom rotating stainless steel wash and rinse
arms
- Wash and rinse pressure and
temperature gauges
- Steam injector tank heat
- Steam pressure gauge and shut-off valve for tank heat
- Vacuum breaker and strainer for rinse water
- Tank drain and overflow
- Machine pre-wired and tested
- Single point electrical connection
Capacities
- 19 batches per hour
- 37 gallon (U.S) wash tank
- 28"W x 28"D x 28"H clear work area
Controls
- Automatic wash water (tank) temperature control
- Complete automatic wash, drain and rinse cycles
- Adjustable wash, drain and rinse cycles
- "Push-stop" button for emergency shut down
- Capability of continuous (manual) wash or rinse
cycle
Utility
Requirements
- Hot water: 13 gpm @ 20 psi.
Consumption: 88 gph
- Tank heat steam: 60 lb./hr @ 15 psi
- Electrical:
460v-3ph-60hz, 4kw,
7amp
230v-3ph-60hz, 4kw, 13amp
208v-3ph-60hz, 4kw, 15amp
Optional Equipment
- Pipe coil tank heat
- Powered vent fan
- Electric tank heat (user to provide a separate fused
disconnect)
- Rinse water temperature booster: steam heated or
electric to raise incoming rinse water temperature from 120oF
or 140oF to 180oF
- Racks:
- General utility basket
- Utensil
basket
- Sheet Pan Rack
- Hold-down covers
- Counter pan rack
|
|
|
|
