E-mail  us: sales@centpar.com

Call us:  (908)322 6150 


 

  


                                                       

 

 

Construction

  • Pass-thru corner design
  • Wrap around door with a 47"W. opening
  • #14 gauge stainless steel construction
  • Stainless steel control panel enclosure
  • Adjustable stainless steel sanitary legs
  • Removable scrap trays
  • Stainless steel machine base
  • Stainless steel door-cable pulley supports
  • 42" diameter roto-table
  • Stainless steel wash piping and nozzles
  • Stainless steel internal rinse piping with brass nozzles
  • 12" diameter vent opening

 

   
  
     Features
  • 10 HP wash pump to deliver 280 gpm and 40 psi
  • Wash and rinse pressure and tempurature gauges
  • Steam injector tank heat
  • Steam pressure gauge and shut-off valve for tank heat
  • Vacuum breaker and strainer for rinse water
  • Tank drain and overflow
  • Machine pre-wired and tested
  • Single point electrical connection

Capacities

  • 18 batches per hour
  • 63 gallon (U.S) wash tank
  • 42" diameter x 28"H internal work area

Controls

  • Automatic wash water (tank) temperature control
  • Complete automatic wash, drain and rinse cycles
  • Adjustable wash, drain and rinse cycles
  • "Push-stop" button for emergency shut down
  • Capability of continuous (manual) wash or rinse cycle

Utility Requirements

  • Hot water: 20 gpm @ 20 psi
    Consumption: 130 gph
  • Tank heat steam: 80 lb./hr @ 15 psi
  • Electrical:
    460v-3ph-60hz, 8kw, 16amp
    230v-3ph-60hz, 8kw, 32amp
    208v-3ph-60hz, 8kw, 36amp
     Optional Equipment
  • Steam coil tank heat
  • Powered vent fan
  • Electric tank heat (user to provide a separate fused disconnect)
  • Rinse water temperature booster; steam heated or electric to raise incoming rinse water temperature from 120F or 140F to 180F
  • Racks:
    - General utility basket
    - Utensil basket
    - Sheet pan rack
    - 40" diameter rack
    - Cover for 40" rack
    - Assorted pan rack